NEC_PRACTICE NEC 2023

NEC 2023 Code Questions Practice Test 15

Free NEC 2023 practice test with 30 questions on special occupancies, hazardous (classified) locations, and garages. Plain-English questions with full explanations.

TOPICS COVERED
NEC Practice Tests

How this test works

Read each question carefully
Look for absolute words like always / never — they often distinguish the right answer.
Manage your time
You have 45 min for 30 questions. Skip tough ones and come back.
Progress is auto-saved
Your answers are saved locally — a page refresh won't lose your work.
Review your answers
After submitting you'll see every explanation and your NEC references.

How to Use This Practice Test

This NEC 2023 Code Questions Practice Test 15 has 30 questions with detailed answers and NEC references. Take the full test, review every wrong answer, and look up the NEC article it references before moving on.

Tip: Mixed-format test — questions jump between topics just like the real exam. Don't spend more than 90 seconds on any one question.

  • Topics covered: All NEC chapters — branch circuits, grounding, conductors, wiring methods, motors, and more.
  • Passing score: Aim for 80%+ consistently before scheduling your exam.
  • Questions: 30 multiple-choice, one correct answer each
30
Questions
45 min
Time
70%
Pass

Timer starts immediately. Progress is auto-saved.

NEC_PRACTICE · NEC 2023
NEC 2023 Code Questions Practice Test 15
Q1 / 30
--:-- ON PACE
Auto-save 0% complete

0
Correct
0
Wrong
0s
Time

Student Reviews

No reviews yet — be the first to share your experience!

Leave a Review

5 stars
0/1000

NEC 2023 Code Questions Practice Test 15 — Question List

Question 1: A Class I hazardous location is one where flammable gases or vapors may be present in:

  • The air, in ignitable amounts
  • Solid dust piles only
  • Nowhere, it never applies
  • Only underwater

NEC Reference: NEC 500.5(B)

Question 2: A Class II hazardous location is made hazardous by the presence of:

  • Combustible dust
  • Flammable gas only
  • Water vapor
  • Nothing hazardous

NEC Reference: NEC 500.5(C)

Question 3: A Class III hazardous location involves the presence of:

  • Easily ignitible fibers or flyings
  • Flammable gas
  • Combustible dust clouds
  • Nothing at all

NEC Reference: NEC 500.5(D)

Question 4: In a Division 1 location, the hazardous condition exists:

  • Under normal operating conditions
  • Only during a fire
  • Never
  • Only once a year

NEC Reference: NEC 500.5(B)(1)

Question 5: Commercial garages used for repair and storage of self-propelled vehicles are covered by:

  • Article 511
  • Article 680
  • Article 210
  • Article 90

NEC Reference: NEC 511.3

Question 6: Wiring in a commercial garage above a hazardous area may be run in ordinary methods when it is:

  • Above the hazardous height
  • Underground and unprotected
  • Inside a fuel tank
  • It is never permitted

NEC Reference: NEC 511.4

Question 7: Wiring in spray application areas, like paint spray booths, is covered by:

  • Article 516
  • Article 250 only
  • Article 90 only
  • Nothing, it is not covered

NEC Reference: NEC 516.4

Question 8: A bulk storage plant, where flammable liquids are stored in tanks, is classified according to:

  • Article 515
  • Article 550
  • Article 600
  • Article 700

NEC Reference: NEC 515.3

Question 9: Gas stations, or motor fuel dispensing facilities, are covered by which NEC article?

  • Article 514
  • Article 800
  • Article 90
  • Article 300 only

NEC Reference: NEC 514.3

Question 10: The space around a fuel dispenser at a gas station within a set distance and height is classified as a:

  • Class I location
  • Ordinary, unclassified location
  • A wet location only
  • A damp location only

NEC Reference: NEC Table 514.3(B)(1)

Question 11: In hospital patient care spaces, branch circuits generally need redundant grounding, meaning:

  • Two separate grounding paths
  • No grounding at all
  • Only one path, ever
  • Grounding is optional

NEC Reference: NEC 517.13

Question 12: A hospital's essential electrical system is designed to keep power available during:

  • A normal power source outage
  • Only weekends
  • Only when it rains
  • It has no such purpose

NEC Reference: NEC 517.30

Question 13: In agricultural buildings with a corrosive atmosphere, wiring methods and equipment must be:

  • Suitable for a corrosive location
  • Made of bare paper
  • Left exposed with no protection
  • Not a concern at all

NEC Reference: NEC 547.5

Question 14: For carnivals, circuses, and fairs, receptacles supplying certain equipment must have:

  • GFCI protection
  • No protection required
  • AFCI protection only
  • A fuse box from 1950

NEC Reference: NEC 525.23

Question 15: A mobile home service disconnecting means is generally located:

  • Outside, near the mobile home
  • Inside a locked closet with no access
  • Underground with no cover
  • On the neighbor's property

NEC Reference: NEC 550.11

Question 16: Recreational vehicle park electrical wiring systems are covered under:

  • Article 551
  • Article 250
  • Article 90
  • Article 300

NEC Reference: NEC 551.71

Question 17: Feeders supplying marina power outlets often require ground-fault protection set to trip at not more than:

  • 30 milliamperes
  • 6 milliamperes
  • 100 milliamperes
  • 500 milliamperes

NEC Reference: NEC 555.35(B)

Question 18: At marinas, electrical connections must be located a set distance above the electrical datum plane, which is:

  • A reference water level used for clearance measurement
  • The bottom of the lake
  • A random point in the parking lot
  • It does not exist

NEC Reference: NEC 555.11

Question 19: Wiring for stage and platform switchboards in theaters is covered under:

  • Article 520
  • Article 90
  • Article 250 only
  • It is not covered

NEC Reference: NEC 520.5

Question 20: Each sign and outline lighting system needs a disconnecting means that opens:

  • All ungrounded conductors
  • Only the ground wire
  • Nothing, it stays on always
  • Only half the circuit

NEC Reference: NEC 600.6

Question 21: The disconnecting means for a sign must be located where it is:

  • Within sight or readily accessible
  • Inside the sign itself, hidden
  • A mile away
  • Nowhere, none is needed

NEC Reference: NEC 600.6(A)

Question 22: A single means of disconnect for elevator power and control circuits should be located:

  • In the machine room or accessible location
  • Inside the elevator car ceiling
  • On the roof with no access
  • Nowhere, it is not required

NEC Reference: NEC 620.51

Question 23: A wet-niche underwater luminaire operating at more than 15 volts must have ground-fault circuit-interrupter protection:

  • GFCI protection
  • No protection at all
  • A fuse from an old panel
  • A wooden cover only

NEC Reference: NEC 680.23(A)(4)

Question 24: Outlets supplying pool pump motors on branch circuits rated 15 or 20 amperes, 125 volt, single phase, must have:

  • GFCI protection
  • No requirement at all
  • A padlock only
  • A timer switch only

NEC Reference: NEC 680.21(C)

Question 25: The equipotential bonding grid around a pool is intended to:

  • Reduce voltage gradients
  • Add more voltage to the water
  • Decorate the pool
  • Nothing at all

NEC Reference: NEC 680.26(B)

Question 26: A general-purpose 125-volt receptacle must be located at least what horizontal distance from the pool edge?

  • 3 feet
  • 6 feet
  • 10 feet
  • 20 feet

NEC Reference: NEC 680.22(A)(1)

Question 27: A disconnecting means for a spa or hot tub must be readily accessible and located within sight, but not less than:

  • 5 feet
  • 1 foot
  • 20 feet
  • 50 feet

NEC Reference: NEC 680.41

Question 28: Electrical equipment for fountains operating at more than 15 volts must be protected by:

  • GFCI protection
  • No protection
  • A wooden barrier only
  • A sign only

NEC Reference: NEC 680.51(A)

Question 29: Indoor pool areas, or natatoriums, often have a corrosive atmosphere, which means equipment should be:

  • Suitable for a corrosive environment
  • Made of unprotected steel
  • Left exposed to chlorine gas with no rating
  • Not a concern

NEC Reference: NEC 680.23(F)

Question 30: Metal parts associated with a hydromassage bathtub circulation system must be bonded together using:

  • An 8 AWG bonding conductor
  • No bonding at all
  • Tape only
  • A wooden dowel

NEC Reference: NEC 680.74

EXAM CARD NEC_PRACTICE
Questions30
Time limit45 min
Pass score70%
Code editionNEC 2023
DifficultyIntermediate
Last reviewedJun 2026

Timer starts immediately. Progress is auto-saved.

Source: NEC 2026 (NFPA 70)